smartctl --all /dev/sda Zum Protokollieren in eine Datei: smartctl --all /dev/sda >smart.txt smartctl 6.4 2014-10-07 r4002 [armv7l-linux-4.4.0-00156-gc9ba6e8] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green (AF, SATA 6Gb/s) Device Model: WDC WD20EZRX-00DC0B0 Serial Number: WD-WMC300869448 LU WWN Device Id: 5 0014ee 6adcd54e6 Firmware Version: 80.00A80 User Capacity: 2.000.398.934.016 bytes [2,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Thu Oct 20 22:26:36 2016 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (26160) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 265) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x70b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 196 196 051 Pre-fail Always - 63304 3 Spin_Up_Time 0x0027 178 162 021 Pre-fail Always - 4091 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 78 5 Reallocated_Sector_Ct 0x0033 194 194 140 Pre-fail Always - 193 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 6310 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 36 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 29 193 Load_Cycle_Count 0x0032 194 194 000 Old_age Always - 19177 194 Temperature_Celsius 0x0022 121 103 000 Old_age Always - 26 196 Reallocated_Event_Count 0x0032 190 190 000 Old_age Always - 10 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 4 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 ATA Error Count: 9 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 9 occurred at disk power-on lifetime: 6310 hours (262 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 61 01 00 00 00 e0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 70 d5 01 00 00 00 e0 00 00:46:29.419 SEEK [OBS-7] e0 d5 01 00 00 00 a0 00 00:46:12.634 STANDBY IMMEDIATE e0 d5 01 00 00 00 a0 00 00:43:13.519 STANDBY IMMEDIATE e0 d5 01 00 00 00 a0 00 00:40:14.405 STANDBY IMMEDIATE e0 d5 01 00 00 00 a0 00 00:37:15.290 STANDBY IMMEDIATE Error 8 occurred at disk power-on lifetime: 6310 hours (262 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 61 01 00 00 00 a0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- e0 d5 01 00 00 00 a0 00 00:46:12.634 STANDBY IMMEDIATE e0 d5 01 00 00 00 a0 00 00:43:13.519 STANDBY IMMEDIATE e0 d5 01 00 00 00 a0 00 00:40:14.405 STANDBY IMMEDIATE e0 d5 01 00 00 00 a0 00 00:37:15.290 STANDBY IMMEDIATE e0 d5 01 00 00 00 a0 00 00:34:16.175 STANDBY IMMEDIATE Error 7 occurred at disk power-on lifetime: 6310 hours (262 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 61 01 00 00 00 a0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- e0 d5 01 00 00 00 a0 00 00:43:13.519 STANDBY IMMEDIATE e0 d5 01 00 00 00 a0 00 00:40:14.405 STANDBY IMMEDIATE e0 d5 01 00 00 00 a0 00 00:37:15.290 STANDBY IMMEDIATE e0 d5 01 00 00 00 a0 00 00:34:16.175 STANDBY IMMEDIATE e0 d5 01 00 00 00 a0 00 00:31:17.061 STANDBY IMMEDIATE Error 6 occurred at disk power-on lifetime: 6310 hours (262 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 61 01 00 00 00 a0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- e0 d5 01 00 00 00 a0 00 00:40:14.405 STANDBY IMMEDIATE e0 d5 01 00 00 00 a0 00 00:37:15.290 STANDBY IMMEDIATE e0 d5 01 00 00 00 a0 00 00:34:16.175 STANDBY IMMEDIATE e0 d5 01 00 00 00 a0 00 00:31:17.061 STANDBY IMMEDIATE Error 5 occurred at disk power-on lifetime: 6310 hours (262 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 61 01 00 00 00 a0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- e0 d5 01 00 00 00 a0 00 00:37:15.290 STANDBY IMMEDIATE e0 d5 01 00 00 00 a0 00 00:34:16.175 STANDBY IMMEDIATE e0 d5 01 00 00 00 a0 00 00:31:17.061 STANDBY IMMEDIATE SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.